Problem: How you can reboot
your Phone Adapter?
Solution: Please follow these steps
to reboot your phone adapter:
1. In the first step, you unplug the power cable
from the VoIP phone adapter.
2. Then Wait approximately 2 to 3 minutes.
3. Plug the power cable into the VoIP phone adapter
again.
Problem: When your calls are going directly
to voicemail
Solution: To correct this problem
following these steps:
• Make sure that your “Do
Not Disturb” feature is not active.
• Make sure that your phone is plugged into
the phone adapter’s phone 1 port.
• Check that your phone adapter is powered
on and the phone 1 light is on.
• If you are using multiple routers and other
networking equipment, try plugging your Phone Adapter
directly into the Internet modem. If this resolves
your issue, you may have to troubleshoot your other
devices.
• If you have done configuration correctly
then reboot the phone adapter.
• If this still does not solve your problem,
please reboot your cable modem and phone adapter.
Problem: When I dial out and hear fine, but
no one can hear me
Solution: For the correction of this
problem you should follow these steps:
To solve this problem you check to see that you are
not utilizing any “bandwidth hogs” on
your network. Or other types of activities where you
may be using your bandwidth to send large files.
If your phone quality returns not to normal, please
following these steps:
• Make sure that your phone
adapter (router) is in a well suited area and has
not overheated.
• If you are using multiple routers and other
networking equipment, try plugging your phone Adapter
directly into the Internet modem.
• Reboot your Phone Adapter (router).
• If that fails, reboot your phone adapter
(router), modem, and computer(s).
Problem: Noise problem in
VOIP
Reason: One common cause of noise
is signal level being too low at some point on the
voice path, when the signal is amplified then the
noise is also amplified. Some equipment problems and
bad electrical connections can also lead to excessive
noise in VOIP.
Solution:
1. Try to solve the noise problems
with specific routes or pieces of equipment (including
telephone handsets).
2. Check the loss plan when problem appears to be
associated with a specific route that connects to
an analog or TDM trunk.
3. Check for excessive jitter or packet loss when
the problem seems to occur on a specific packet
path.
Problem: VOIP networking
Problems
Solution: You must follow these steps
one by one to solve the network problems in VoIP.
1. Check that your VoIP setup
and installation is ok.
2. Make sure that your adapter and router are working
properly.
3. Check all the cables that connect to your VoIP
network. When cables are loose and unsecured become
cause of many problems.
4. You can use the best VoIP troubleshooting software.
5. These software programs optimize your VoIP network
path to enhance your VoIP performance and troubleshoot
some of the network congestion that troubles you
to use VoIP efficiently.
6. VoIP troubleshooting software improves the call
quality and voice clarity in VoIP.
This article provides the solution
of some common problems in VoIP. A VoIP user can troubleshoot
these common problems like VoIP security problem,
networking problems, dial tone problems, dropped call
problems by the help of this article.
|