How to troubleshoot wireless network connection

This article helps you that how you can repair Wireless network connections. Wireless connection problems occur for a number of reasons and can range from a poor signal, to a sporadic signal, to being totally cut off. Most of cases the solution is to re-establishing your connection, this section of article covers that how Wireless network connections can be troubleshoot if the Wireless network connection failed to response.

You must ensure the driver compatibility

• You have to be installing the correct device driver for your wireless network adapter.
• Once the correct driver was installed, everything began to run smoothly.

Change the location of your antenna

• If you change the location of your antenna it’s quit possible that the network connection problem does not occur again.
• Directional antennas are suitable for environments where you have a direct line of site from one access point to another and from access point to client; the signal travels in a straight line.

Make the good network settings

.Encryption Keys

• In Windows XP, on the Association tab of your wireless network properties dialog box, verify that your network key has been entered correctly and is valid for the network you are attempting to connect to.

MAC Address Filters

• Verify that the problematic client’s MAC is in the address list.
• This will only permit clients with the specified MAC Addresses to communicate with the network

DHCP Addresses

• Some of the newer access points on the market come with their own DHCP server which usually assigns addresses in the 192.168.0.x range

Wireless network connections repair in Windows XP
To troubleshoot wireless network connections in Windows XP, follow these steps:

1. Check the Windows XP-compatible driver that is available for your wireless adapter.
2. Recognizes the Windows XP Wireless Zero Configuration service. To do this, follow these steps:
3. Press Start, and then click Control Panel.
4. In the right pane, click Network and Internet Connections.
5. In the right pane, click network connections.
6. Right-click Wireless network connection and then presses properties.
7. View the available options.
8. You can view the Wireless Network Connection icon.

After having read this article you should be familiar with common wireless network connections problems and what you can do to fix them. I hope that you will now be able to follow these steps when a wireless problem occurs and take the necessary action in solving such Wireless network problems.